Scope of application
- Home
- /
- Scope of application
Nordisk Energioptimering
Business
Here you can see a selection of businesses that we serve
Common problem areas
COOLING UNIT
Cooling tower
The cooling tubes and walls of the cooling towers are usually covered with a lot of lime and moss and algae. By draining the water in the unit, we can start removing the coating and freeing the surfaces from the coatings covered inside the unit.
Refrigerated condensers
All types of refrigeration condensers are usually located outdoors. Algae, lime, peas, salt, leaves, feathers, pollen, etc. adhere to the fins and cooling pipes as well as to the fan blades and prevent full efficiency or the aluminium is dissolved by the water mixed with chemicals
V-set cooling condenser
All types of refrigeration condensers are usually located outdoors. Algae, lime, peas, salt, leaves, feathers, pollen, etc. adhere to the fins and cooling pipes as well as to the fan blades and prevent full efficiency or the aluminium is dissolved by the water mixed with chemicals
Evaporators
These units run 24/7 all year round and are usually very dirty with dust, mould, sand, lime and soil. The trucks tear up the dust as they drive around the premises and the gates are constantly opened and closed. Dust sticks to the slats and drip trays
HEAT RECOVERY UNIT AIR & VENTILATION
Fan room
As a property owner or manager, the last thing you want to deal with is a substandard ventilation system. Not only is it a health risk for your customers, but it can also lead to expensive repairs down the road
Rotary exchangers
Most of the time, these rotating exchangers are perfectly fine, but full of dust, dirt, cooking fat, oils, industrial grease, lime, deposits, zinc irritations, leaves, springs, hair, clothing dust, welding fumes, etc.
RIDAFARMS
Curtain heaters are usually full of dust and dirt. This prevents them from delivering full power and these units run at full capacity during the day without slowing down.
cross-changers
Usually these batteries, cross-connectors are ok but full of dust, dirt, grease, oils, industrial grease, lime, deposits, zinc deposits, leaves, feathers, hair, clothing dust, soot, welding fumes, etc.
NEEDLE BATTERIES
These batteries have barbs like fish hooks on the end of them. These barbs suck in all kinds of lint, dust, cotton, larger particles of dirt, oils and pollutants.
other problem areas
strorage & stAllage
Storage and cold storage facilities usually have a lot of dirt, grease, mould or other contaminants of materials that should not be on the shelf. There is very often black mould in the ceilings of the chicken store or above the goods doors because of the dew point that gets between the cold and the heat when the doors are constantly opened and closed.
Paint boxes
When these units and ducts are blocked, the circulation of the air stops working. Particles of dust and paint will then be in the air of the paint box, which will give the paint small dots and become uneven. Detta medför extra arbete att polera bort prickarna och brukar ta mycket arbetstid och mantimmar.
Glue guns in factory
In industries, there are many areas and machines that cannot or should not be cleaned with water and chemicals. NEO has extensive and broad experience of cleaning in various machine parts and machine fleets. Get in touch and we'll help you with your questions, concerns and factory problems that need solving.
Electric cabinet
Electrical cabinet and switchgear cleaning NEO has developed a method that is very effective. We turn off the power to every unit we work on and clean with one of the world's smallest and most efficient ice blasters on the market. We clean EVERYTHING in the cabinet without damaging a solder joint, microchip or component
DECONTAMINATION, RENOVATION, MOULD AND FIRE
Mould
Nordic Energy Optimisation offers total solutions to address moisture problems, mould outbreaks and prevent them from recurring. We carry out remediation work in both building interiors and underground spaces.
Renovation
The Neo method is perfect for exterior roofs and facades where airborne contaminants usually get trapped with their mould and debris; as there is also no post-application treatment required - it couldn't be easier!
Fire
A fire cleaning involves removing as many particles as possible from the smoke and also all odors and discolorations that may occur on various surfaces where the fire occurred.
